Controller/brake device  
     
 
Speed control and brake control use
◎ Able to match from 6W~120W 　
◎ Contact wiring and non-wiring contact, AC110V/220V　　
◎ Able to use "VR" or DC0~5V to do speed setting
◎ Speed control display type is available
◎ Possess with gentry start and stop function　
◎ Able to set gear ratio
◎ Brake device is able to do instant stop in less than 0.1 second
 
 
  　 Brief introduction of Controller/brake device  
 
 
HC201/202
HMD32-HR
HMD3□/SSD
HMD22
‧non-contact wiring controller
‧Instantly running reverse or stop
‧Gentry start and stop function
‧Able to do speed change from "VR" on the controller or "VR" departed from controller
‧Eletronic-Magnetic brake is available
‧Plug-in type controller(11Pin)
‧Instantly running reverse or stop
‧Gentry start and stop function
‧Able to do speed change from "VR" on the controller or "VR" departed from controller
‧Plug-in type controller(11Pin)
‧Instantly running reverse or stop
‧Gentry start and stop function(SSSD)
‧Able to use "VR" or DC0～5V to do speed control
‧Plug-in type controller(8Pin)
‧Instantly running reverse or stop
‧Gentry start and stop function(SSSD)
‧Able to use "VR" to do speed control
 
     
 
HUS
HUX
HMB31-IN
‧Simplified type controller
‧Reduce complicated wiring
‧electrify after connection with motor is made
‧Operating on control panel
‧Not able to do instant reverse run or stop
‧Simplified display type controller
‧Able to show RPM when running instantly
‧Able to set gear ratio
‧Not able to do instant reverse run or stop
‧Magnetic Brake, low abrasion longer life
‧Pressure resistance is able to reach electric current at 3 ampere
‧Motor is able to stop in less than 0.1 second
‧Brake time is approximately 0.4 second and after
 
     
  　 All kinds of controllers  
 
       
HMD3104Q (Separate type controller)
HMD21 (Separate type controller)
HMD32-SSSD (Separate type controller)
HUS206-02 (Economic type controller)
       
HC201 (Non-contact type controller)
HUX590-02 (Display type controller)
HMD32A-HR
HMD31A (Separate type controller)
       
   
HMD32A (Separate type controller)
HMD1104Q (Separate type controller)
 
     
     
2007 © HONTO DENKI GEAR MOTOR CO., LTD ‧Address：No.3, Gong 2nd Rd., Linkou Township, Taipei County 244, Taiwan
‧Tel：886-2-26010699 ‧Fax：886-2-26010959 ‧E-mail：honto.denki@msa.hinet.net